Synchronous recording (component system operation)
(4) After adjusting the recording level, press
4Adjust the recording level.
the MULTI JOG dial.
(1) Press the EDIT/NO button and turn thePressing the YES button provides the same
MULTI JOG dial until "Rec Level?"operation.
appears.
MULTI JOG
MULTI JOG
EDIT / NO
PUSH TO ENTER
PUSH TO ENTER
5Stop the CD player.
(2) Press the MULTI JOG dial.
Pressing the YES button provides the same
6Press the s button on the CD player.
operation.
The CD player starts playing and recording starts
Press the EDIT/NO button if you cancel the
adjustment operation.at the CDR-201A.
(3) Turn the MULTI JOG dial to adjust the
recording level as desired.
The current level is displayed, ranging from - to
+18 dB.
When the CD finishes
MULTI JOGThe CDR-201A automatically returns to the
recording standby state.
To stop the CD synchronous recording
Stop play at the CD player. The CDR-201A enters
the recording standby state.
PUSH TO ENTER
Note:
Adjust so that when the recording level is at its
During analog recording, set the input dial on the
highest, it does not reach "OVER" in the front
amplifier to the CD position and be sure not to
display. If OVER is reached, the sound becomes
change this setting during recording. If this setting is
distorted.
changed, the CDR-201A will automatically enter the
recording standby state.
Adjust the level so that "OVER" will not light.
L
402010420 OVER
R
For digital recording
Even if you change the recording level, the
monitor sound level from the DIGITAL OUT
terminal will not change.
24 |